ROCKLAND SPORTS: 2865 Laurier street, Rockland Ontario. K4K 1A3, 613-446-9559, email: rocklandsports@live.com

BEACHCOMBER Ph Plus (600g) - pH Increaser

$11.99
SKU 70110
In stock
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Save this product for later
Share this product with your friends
BEACHCOMBER Ph Plus (600g) - pH Increaser
Product Details
UPC: 628183701103
Brand: BEACHCOMBER

Ph Plus (600g) - pH Increaser




SKU: 70110


pH PLUS effective for minor pH increases of hot tub water to prevent corrosion and eye/skin irritation and increase sanitizer efficiency. Before adjusting pH, ensure your Total Alkalinity is balanced. Maintain a proper (pH) level of 7.2 – 7.8


Available size : 600g


pH : 11.0


Beachcomber pH Plus is a granular product that increases the pH of your hot tub water. It effectively increases the pH of pool or hot tub water to keep pH in the correct range. The correct pH range is from 7.2 to 7.8 which will prevent eye irritation, corrosion, scaling and staining, helping to increase the efficiency of the sanitizer.




Tips



Application



  • Adjust pH to a range of 7.2 -7.8. 

  • Add 4 g of pH Plus per 1000 L of water to increase the pH by 0.2





Water Balance Parameters



pH (7.2 - 7.8)


pH is a measure of how acidic or basic the water is. If the water is below 7.0, the water is acidic. If the pH is above 7.0, the water is basic.Acidic water can cause pitting of the heater element, and can damage the equipment. Basic water forces the calcium dissolved in the water out of solution, causing cloudy water and scaling.The pH also has a dramatic effect on the sanitizer effectiveness in the water. A high pH level results in greatly reduced sanitizer effectiveness.


Factors that can contribute to a pH change


Addition of fresh water, rain, bather use, chemicals, dust, algae, neglect, improper testing, a drop in alkalinity, carry-out or splash out, evaporation and body lotions, soaps and oils.


What to do ?



  • Increase the pH using Beachcomber pH Plus

  • Decrease the pH using Beachcomber pH Minus

  • Increase the pH if Total Alkalinity is low, by adding Beachcomber Resist